ALITOVE 12V Power Supply 20A 240W AC DC Adapter, Converts 110V/240V AC to 12 Volt 20 Amp for Powering LED Light Strips, 3D Printers, CCTV Security Systems, And LCD Monitors

Ideal for LED strips, 3D printers, ham radio transceivers, CCTV cameras, car subwoofer amplifiers, audio amplifiers, wireless routers, ADSL modems, hubs, and audio/video power supplies. For indoor use exclusively!

Please be aware that we advise keeping power usage below 80% of the maximum capacity to prevent reducing the lifespan of the power supply. It is recommended to utilize this 12V 20A 240W power supply for devices that consume less than 192W. Ensure to set the switch to either 110V for the USA/Canada or 220V for Europe before use to avoid any damage.

The voltage setting of 110V or 220V should be chosen using the switch prior to use to prevent any damage.

It arrives lacking installation guidelines, a power cable, a power switch, and screws. It is strongly advised to have a licensed electrician perform the installation.

There is a high voltage present; do not take off the cover under any circumstances. This device is not and is intended for indoor use exclusively.

Input: 110V/220V AC; Output: DC 12V with a maximum of 20A. The output voltage can be adjusted by 5%. There are three output channels available.

The enclosure lacks a fan, operating quietly. The metal casing, featuring numerous openings, enhances heat dissipation.

Voltage stability: There are no noticeable voltage variations during power-up, transmission, reception, or shutdown.

Safety mechanisms include automatic overload shutdown, over-voltage shutdown, automatic thermal shutdown, and short circuit protection.

There are three output channels available. The power supply features three output ports, each capable of delivering a maximum of 20A. However, the overall power must not surpass 240W.

The AC voltage configuration can be adjusted. The power selection switch is found within the enclosure. Utilize a screwdriver to access and switch it to 220V for the UK/EU or 110V for the USA/CA.

The honeycomb structure significantly enhances heat dissipation efficiency, guarantees the safe functioning of the power supply, and prolongs its lifespan.

The output voltage can be adjusted by plus or minus 5%, significantly broadening its range of applications. It is capable of providing any current your device requires (up to 20A), including 5A, 10A, 15A, or 20A.

The advanced synchronous rectifier smart chip and EMI filter are designed to transform variable voltage into a consistent output, significantly minimizing electromagnetic interference.